Table of Contents
Advertisement
1. This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the
logged IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic
code" section of the Info Center for the appropriate user response.
Firmware Error : Sys Boot Status :
•
806f000f-220102ff : Subsystem [MemoryElementName] has insufficient memory for operation.
(ABR Status)
This message is for the use case when an implementation has detected that the usable Memory is
insufficient for operation.
May also be shown as 806f000f220102ff or 0x806f000f220102ff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Memory
SNMP Trap ID
41
CIM Information
Prefix: PLAT ID: 0132
User Response
1. This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the
logged IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic
code" section of the Info Center for the appropriate user response.
Firmware Error : Sys Boot Status :
• 806f000f-220103ff : The System [ComputerSystemElementName] encountered firmware error -
unrecoverable boot device failure. (ABR Status)
This message is for the use case when an implementation has detected that System Firmware Error
Unrecoverable boot device failure has occurred.
May also be shown as 806f000f220103ff or 0x806f000f220103ff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Appendix A. Integrated Management Module II (IMM2) error messages
395
Advertisement
Table of Contents
Troubleshooting
