Table of Contents
Advertisement
Step 1.
Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 31.
Step 2.
Orient the USB connector board as shown in the illustration; then, align the screw holes on the
USB connector board with the screw holes on the USB assembly.
Figure 162. USB assembly screws installation
Step 3.
Install the screws to secure the USB connector board to the USB assembly.
Step 4.
From the front of the server, slide the USB assembly into the USB slot until it clicks into place.
Figure 163. USB assembly installation
252
Lenovo System x3530 M4 Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
