Advanced Settings Utility Program - Lenovo x3530 M4 Installation And Service Manual

7. Select Select Drives and use space key to select all the drives for your array.
8. Select Apply Changes to create the array.
9. When the prompt Success is displayed, select OK to continue.
10. After the system auto skip to the next screen, select Save Configuration.
11. When the prompt Creating Virtual Drives will cause the data lost on the associated Drives to be
permanently deleted. is displayed, use space key to select Yes to continue.
12. Select OK to continue.
13. To initialize virtual disk, select ServeRAID C105 ® Virtual Drive Management ® Select Virtual
Drive Operations.
14. Under Virtual Drive Operation, choose Select Operation. Select the type of initialization you want
to initialize.
15. Select Start Operation.
16. Select Yes to confirm.
17. Select OK to continue.
18. When the prompt Success is displayed, select OK.
Notes:
1. For further details on creating a software RAID array of hard disk drives, please see the ServeRAID C105
documentation at http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5089068.
2. Some specific models may be shipped initially with four hard disk drives. Configuration may be
able to expand to eight hard disk drives via Features on Demand (FoD). Please note that the server
may need to be restarted to activate the feature. For more information on Features on Demand
(FoD), including instructions for automating the activation and installation of the activation key by
using IBM ToolsCenter or IBM Systems Director, see the IBM Features on Demand User's Guide at
http://www.ibm.com/systems/x/fod/ under the Help section.
3. Software RAID does not support VMware 5 and VMware 4.1.
4. Software RAID does not support legacy configuration.
5. In order to install the legacy OS in the software RAID, you have to set the SCU Controller as the
first device in the option ROM execution order.
6. ServeRAID-C105 does not support both hot-swap and solid-state drives.

Advanced Settings Utility program

The Advanced Settings Utility (ASU) program is an alternative to the Setup utility for modifying UEFI settings.
Use the ASU program online or out of band to modify UEFI settings from the command line without the need
to restart the system to access the Setup utility.
You can also use the ASU program to configure the optional remote presence features or other IMM settings.
The remote presence features provide enhanced systems-management capabilities.
In addition, the ASU program provides limited settings for configuring the IPMI function in the IMM through
the command-line interface.
Use the command-line interface to issue setup commands. You can save any of the settings as a file and run
the file as a script. The ASU program supports scripting environments through a batch-processing mode.
For more information and to download the ASU program, go to https://support.lenovo.com/us/en/
documents/LNVO-ASU.
.
Chapter 3 Configuration information and instructions
97