Installing An Optional Serveraid Sas/Sata Controller - Lenovo x3530 M4 Installation And Service Manual

Figure 33. Adapter installation in PCI riser-card assembly 2
Step 7. Install the PCI riser-card assembly in the server (see "Installing a PCI riser-card assembly" on
page 45).
Step 8. Perform any configuration tasks that are required for the adapter.
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation"
on page 73.

Installing an optional ServeRAID SAS/SATA Controller

Use this information to install a ServeRAID SAS/SATA controller.
Figure 34. ServeRAID adapter installation
You can purchase an optional ServeRAID SAS/SATA controller. You must install the optional ServeRAID
adapter in PCI slot 3 on PCI riser-card assembly 2. If the server does not already come with PCI riser-card
assembly 2, you must purchase the PCI riser-card assembly option. For configuration information, see the
ServeRAID documentation at http://www.ibm.com/support/mysupport/.
Attention: Some cluster solutions require specific code levels or coordinated code updates. If the device
is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before
you update the code.
.
Chapter 2 Installing optional devices
49