Table of Contents
Advertisement
Figure 160. Front USB connector board removal (for 3.5-inch HDD models)
Step 7.
Remove the two screws from the USB assembly and rotate the front USB connector board out
of the USB assembly.
Figure 161. USB assembly screws removal
Step 8.
If you are instructed to return the front USB connector board, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Replacing the front USB connector board
Use this information to replace the front USB connector board.
To replace the front USB connector board, complete the following steps:
.
Chapter 6
Removing and replacing structural parts
251
Advertisement
Table of Contents
Troubleshooting
