Lenovo x3530 M4 Installation And Service Manual page 88

Step 8. Complete the additional steps in "Instructions for Business Partners" on page 23.
Replacing the air baffle
Use this information to replace the air baffle.
To install the air baffle, complete the following steps:
Step 1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 31.
Step 2. Align the tabs on the sides of the air baffle with the slots on the fan cage and lower the air baffle
into the server.
Note: Make sure that no cable is pinched.
Figure 60. Air baffle installation
Replacing a PCI riser-card assembly
Use this information to replace the PCI riser-card assembly.
To replace a PCI riser-card assembly, complete the following steps:
Step 1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on
page 31.
Step 2. Install the adapter in the PCI riser-card assembly (see "Installing an adapter" on page 46).
Step 3. Align the PCI riser-card assembly with the PCIe slot connector on the system board and align
nailheads with the slots on the chassis; then, press down firmly until the riser-card assembly is
seated correctly in the connector on the system board.
74
Lenovo System x3530 M4 Installation and Service Guide