3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
–
IBM Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
•
201-827-002 : Standalone Memory Test Aborted
BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
–
IBM Support website
–
Latest level of DSA
–
Latest level of BMC/IMM
•
201-827-003 : Standalone Memory Test Aborted
BIOS: ECC function has been disabled by BIOS. Go to Setup and enable ECC generation.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
738
Lenovo System x3530 M4 Installation and Service Guide