Lenovo x3530 M4 Installation And Service Manual page 278

Microprocessor
release lever
Figure 176. Open the microprocessor bracket frame
Step 11. Align the holes on the microprocessor installation tool with the screws on the microprocessor
bracket, then place the microprocessor installation tool down over the microprocessor
the handle clockwise
Note: You can pick up or release the microprocessor by twisting the microprocessor installation
tool handle.
Figure 177. Microprocessor tool attachment
Step 12. Carefully lift the microprocessor straight up and out of the socket, and place it on a static-protective
surface. Remove the microprocessor from the installation tool by twisting the handle
counterclockwise.
Attention: Do not touch the pins on the socket. The pins are fragile. Any damage to the pins may
require replacing the system board.
Figure 178. Microprocessor removal
264
Lenovo System x3530 M4 Installation and Service Guide
Microprocessor
bracket frame
2
to attach the tool to the microprocessor.
1 . Twist