Table of Contents
Advertisement
Power paddle card
Figure 76. Power paddle card screws removal
Step 5.
Remove the power paddle card out of the GPU tray with an angle.
Power paddle card
2
1
Figure 77. Power paddle card removal
Step 6.
If you are instructed to return the power paddle card, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Replacing the power paddle card on to the GPU tray
Use this information to install the power paddle card on to the GPU tray.
Before you install the paddle card, complete the following steps:
1. Read "Safety" on page v and "Installation guidelines" on page 101.
2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see "Removing a compute
node from a chassis" on page 104 for instructions).
3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with
the bezel pointing toward you.
To install the power paddle card on to the GPU tray, complete the following steps:
Screws
Chapter 5
.
Removing and replacing components
149
Advertisement
Table of Contents
Troubleshooting
