Port Commands Set; Table 3.4: Port Commands Set - Advantech EKI-7657C User Manual

dhcpserver subnetmask
[Subnet mask]
dhcpserver gateway
[Gateway]
dhcpserver dnsip
[DNS IP]
dhcpserver leasetime
[Hours]
dhcpserver ipbinding
[IP address]
show dhcpserver configuration
show dhcpserver clients
show dhcpserver ip-binding
no dhcpserver
security enable
security http
security telnet
security ip
[Index(1..10)] [IP Address]
show security
no security
no security http
no security telnet
3.1.4

Port Commands Set

Table 3.4: Port Commands Set

Netstar Commands
interface fastEthernet
[Portid]
duplex
[full | half]
speed
[10|100|1000|auto]
no flowcontrol
security enable
no security
Configure subnet mask for DHCP
G
clients
Configure gateway for DHCP clients
G
Configure DNS IP for DHCP clients
G
Configure lease time (in hour)
G
Set static IP for DHCP clients by port
I
Show configuration of DHCP server
P
Show client entries of DHCP server
P
Show IP-Binding information of
P
DHCP server
Disable DHCP server function
G
Enable IP security function
G
Enable IP security of HTTP server
G
Enable IP security of telnet server
G
Set the IP security list
G
Show the information of IP security
P
Disable IP security function
G
Disable IP security of HTTP server
G
Disable IP security of telnet server
G
Level Description
Choose the port for modification.
G
Use the duplex configuration
command to specify the duplex
I mode of operation for Fast
Ethernet.
Use the speed configuration
command to specify the speed
mode of operation for Fast
I
Ethernet., the speed can't be set to
1000 if the port isn't a giga port..
Disable flow control of interface
I
Enable security of interface
I
Disable security of interface
I
29
switch(config)#dhcpserver subnetmask
255.255.255.0
switch(config)#dhcpserver gateway 192.168.1.254
switch(config)#dhcpserver dnsip 192.168.1.1
switch(config)#dhcpserver leasetime 1
switch(config)#interface fastEthernet 2
switch(config)#dhcpserver ipbinding 192.168.1.1
switch#show dhcpserver configuration
switch#show dhcpserver clients
switch#show dhcpserver ip-binding
switch(config)#no dhcpserver
switch(config)#security enable
switch(config)#security http
switch(config)#security telnet
switch(config)#security ip 1 192.168.1.55
switch#show security
switch(config)#no security
switch(config)#no security http
switch(config)#no security telnet
Example
switch(config)#interface fastEthernet 2
switch(config)#interface fastEthernet 2
switch(config-if)#duplex full
switch(config)#interface fastEthernet 2
switch(config-if)#speed 100
switch(config-if)#no flowcontrol
switch(config)#interface fastEthernet 2
switch(config-if)#security enable
switch(config)#interface fastEthernet 2
switch(config-if)#no security
Chapter3