Figure 4.39 L2 Switching > Link Aggregation > Lag Management Information; Figure 4.40 L2 Switching > Link Aggregation > Lag Port Settings - Advantech EKI-7712 Series User Manual

The following figure displays the LAG Management Information settings.
Figure 4.39 L2 Switching > Link Aggregation > LAG Management Information
4.5.3.3 LAG Port Settings
The LAG Port Settings page allows you to enable or disable, set LAG status, speed
and flow control functions.
In this example we will configure a LAG between the following switches:
To access this page, click L2 Switching > Link Aggregation > LAG Port Settings.
Figure 4.40 L2 Switching > Link Aggregation > LAG Port Settings
The following table describes the items in the previous figure.
Item
LAG Select
Enabled
Speed
Flow Control
Apply
EKI-7720 Series User Manual
Description
Click the drop-down menu to select a predefined LAG trunk definition:
LAG 1-8.
Click the radio button to enable or disable the LAG Port.
Click the drop-down menu to select the port speed: Auto, Auto-10M,
Auto-100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Click the radio button to enable or disable the Flow Control for the
LAG Port.
Click Apply to save the values and update the screen.
53