Link Aggregation - Advantech EKI-7428G Series User Manual

M S
ANAGING WITCH
Port Utilization
To access this page, click Monitoring > Port Monitoring > Port Utilization.
Figure 4-6. Monitoring > Port Monitoring > Port Utilization
The following table describes the items in the previous figure.
Table 4-4. Monitoring > Port Monitoring > Port Utilization
Item
Refresh period
IFG

4.3.4 Link Aggregation

The Link Aggregation function provides LAG information for each trunk. It displays
membership status, link state and membership type for each port.
To access this page, click Monitoring > Link Aggregation.
The ensuing table for Link Aggregation Group Status settings are informational only: LAG,
Name, Type, Link State, Active Member and Standby Member.
The ensuing table for LACP Information settings are informational only: LAG, Port, Partner-
SysId, PnKey, AtKey, Sel, Mux, Receiv, PrdTx, AtState and PnState.
33
Click the drop-down menu to select and designate a period (second
intervals) to refresh the information (TX and RX) listings.
Click the drop-down menu to enable or disable the Interframe Gap (IFG)
statistic.
Description