Configuration; System; Figure 4.2 Changing A Default Password; Figure 4.3 Creating System Information Settings - Advantech EKI-8500 Series User Manual

5. Click Save to change the current account settings. Alternatively, click Reset or
Cancel.
After saving all the desired settings, perform a system save (Maintenance >
Configuration > Save startup-config) by clicking Save Configuration. The
changes are saved.
4.3

Configuration

4.3.1

System

4.3.1.1 Information Configuration
To access this page:
1. Navigate to Configuration > System and click Information.
The System Information Configuration page displays.
The following table describes the items in the previous figure.
Item
System Contact
System Name
System Location
Save
Reset

Figure 4.2 Changing a Default Password

Figure 4.3 Creating System Information Settings

Description
Enter identification information to describe the contact option for
management events. String length is 0 to 255. Only ASCII characters
from 32 to 126 are supported.
Enter the name to the assigned contact information using alpha
numeric characters (A-Za-z), digits (0-9), and minus symbol (-). String
length is 0 to 255. No space characters are supported. The first
character must be an alphanumeric character. The first or last
character must not be a minus sign.
Enter a description to identify the physical location of this node. The
allowed string length is 0 to 255. Only ASCII characters from 32 to
126 are supported.
Click Save to store the settings.
Click Reset to clear the settings.
32 EKI-8500 Series User Manual