Table of Contents
Advertisement
Placing an Original in the Auto Document Feeder (ADF)
DZW795
2
• When using the ARDF to scan originals with a paper weight less than 42 g/m
(11 lb. Bond),
move the slide tray on the original output tray to the left side. When the slide tray of the Auto
Reversible Document Feeder (ARDF) is in the left, the amount of output paper will be low. After
scanning a thin original, return the slide tray to the previous position.
DZW109
Placing Originals in the One-pass Duplex Scanning ADF
• Do not block the sensors with your hand. Be sure to load the originals neatly and do not push them
into the ADF forcibly. It may cause paper misfeeds or paper size error.
DZW110
63
Advertisement
Table of Contents
