Placing Originals in the ADF or ARDF
Place originals in the ADF or ARDF.
Be sure not to block the sensor or load the original untidily. Doing so may cause
the machine to detect the size of the original incorrectly or display a paper mis-
feed message. Also, be sure not to place originals or other objects on the top cov-
er. Doing so may cause a malfunction.
❖ ARDF
1 Sensors
❖ ADF
1 Sensors
Setting should be made when placing custom size originals.
❖ When placing custom size originals:
See "Specifying the Original Size (Custom Size)".
AAI036S
Placing Originals
1
11