Toro Z Master Z597 Service Manual page 161

MOWER DECKS
4. Install the rear and front lift chains to the mower
deck (Fig. 435).
5. Remove the hitch pin on the lift handle and raise the
mower in the transport position.
6. Install a 4 x 4 wood block under the right side of the
mower deck.
7. Lower the mower deck down on the wood block.
8. Install the strut pin in the strut assembly. Install and
tighten the bolt and nut.
9. Install the rear and front lift chains to the mower
deck.
10. Raise the mower deck and remove the wood block
from under the mower.
7
7-14
Fig 435 DSC-2640
11. Install the right mower drive belt on the bottom
sheave of the jackshaft pulley (Fig. 436).
Fig 436
12 Install the left mower drive belt on the middle sheave
of the jackshaft pulley (Fig. 437).
Fig 437
Z Master 597 Diesel Series Service Manual
DSC-2641
DSC-2642