Toro Z Master Z597 Service Manual page 107

ENGINE
37. Install coolant in the radiator (Fig. 290), and the
overflow bottle (Fig. 291). Fill to the line indicator of
the overflow bottle. Refer to Checking the Radiator
Coolant, page 5-28.
5
38. Check the hydraulic fluid in the reservoir; refer to
Figure 006, page 2-5.
39. Install the battery in the unit and connect the positive
and negative battery cables.
5-20
Fig 290 DSC-2502
Fig 291 DSC-2503
40. Prime the fuel system; refer to Priming the Fuel
System, page 5-34. Start the unit up and run for
approximately 5 minutes.
41. Check for any leaks in the hydraulic fluid lines, fuel
lines, and the coolant lines. The hydraulic system
may need air purged from the hydraulic system,
refer to Purging the Hydraulic System, page 4-13.
Top up coolant and hydraulic fluid as needed.
42. Install the engine access panel with two knobs (Fig.
292).
Fig 292
43. Install the rear bumper assembly and tighten the 4
bolts (Fig. 293).
Fig 293
Z Master Z597 Diesel Service Manual
DSC-2504
DSC-2452