Replacing Mower Drive Belts - Toro Z Master Z597 Service Manual

8. Install the tension spring on the idler arm (Fig. 535).
Fig 535
9. Install the belt covers and close the latches (Fig.
536).
Fig 536
1. Belt cover
Z Master 597 Diesel Series Service Manual
DSC-2628
fig. 72 m-7422
2. Latch
MOWER DECKS

Replacing Mower Drive Belts

Note: Remove the mower spindle belt first. If any of
the primary drive belts need to be replaced,
see Replacing the Mower Spindle Belt, page
7-39.
1. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Loosen the 4 bolts holding the rear bumper
assembly and remove from the unit (Fig. 537).
Fig 537 DSC-2595
7
7-41