Toro Z Master Z597 Service Manual page 170

11. Turn the spindle housing over and remove the oil
seal from the bottom of the spindle housing (Fig.
467). Note the orientation of the lower oil seal. The
open end of the seal faces outwards to help relieve
pressure from over-greasing the spindle assembly.
Fig 467
12. Remove the tapered roller bearing from the bottom
of the spindle (Fig. 468).
Fig 468
Z Master 597 Diesel Series Service Manual
13. Using a hammer and a driver with a square edge,
drive both the top and bottom bearing races out of
the spindle housing (Fig. 469).
DSC-2679
14. Remove the large spacer in the spindle housing (Fig.
470).
DSC-2680
MOWER DECKS
Fig 469
Fig 470
DSC-2681
7
DSC-2682
7-23