Toro Z Master Z597 Service Manual page 64

1. Install wheel motor in the frame. Loosely install the
back two bolts, long spacers, lock washers and nuts
(Fig. 153).
Fig 153
2. Align the brake linkage up with the two front bolt
holes (Fig. 154).
Fig 154
Z Master Z597 Diesel Service Manual
HYDRAULIC SYSTEM
3. Install the two front bolts, short spacers, lock
washers, and nuts through the wheel motor, brake
linkage and frame (Fig. 155).
DSC-2116
4. Install the two rear bolts and long spacers through
the wheel motor and frame.
5. Torque the bolts to 80 to 90 ft-lbs. (108 to 122 Nm)
(Fig. 156).
DSC-2119
Fig 155 DSC-2120
Fig 156
DSC-2122
4
4-11