MOWER DECKS
25. Install the rear bumper assembly and tighten the 4
bolts (Fig. 450).
7
7-18
Fig 450
DSC-2595
Mower Spindle Removal
This applies to removing any of the three mower
spindles. This procedure shows removing the right side
spindle.
1. Use a hoist or the Z Stand to raise the front of the
mower deck.
2. Chock or block the drive wheels.
3. Disconnect the battery negative cable.
4. Lower the mower deck to the lowest position.
5. Lift the floor pan (Fig. 451).
Fig 451
Z Master 597 Diesel Series Service Manual
DSC-2625