Toro Z Master Z597 Service Manual page 30

2. Remove the 4 screws retaining the control panel and
control panel shield to the tank (Fig. 034).
Fig 034
3. Carefully remove the control panel and control panel
shield by lifting the panel and sliding it to the middle
of the unit.
NOTE: It is not necessary to disconnect any cables
or wiring.
4. Unplug the 3 connectors that plug into the delay
module (Fig. 035).
Fig 035
Z Master Z597 Diesel Service Manual
5. Remove the return fuel line, located on the inside of
the fuel tank (Fig. 036).
DSC-1563
6. Remove the fuel line, located under the front of the
fuel tank (Fig. 037).
DSC-1578
CHASSIS
Fig 036 DSC-1565
Fig 037
DSC-1566
3
3-9