Hood Assembly Installation; Throttle Control Replacement - Toro Z Master Z597 Service Manual

CHASSIS

Hood Assembly Installation

Reverse the order of removal.

Throttle Control Replacement

1. Disconnect the negative battery cable.
2. Remove the 4 screws retaining the control panel to
the fuel tank (Fig. 046).
3
3. Remove the ball knob located on the throttle control
by applying upward pressure under the knob (Fig.
047).
3-12
Fig 046 DSC-1584
Fig 047 DSC-1586
4. Remove the two locknuts and carriage bolts
retaining the throttle cable assembly (Fig. 048).
Fig 048
5. Disconnect the end of throttle cable at the swivel
clamp, located on the throttle linkage at the injector
pump (Fig. 049).
Fig 049
Z Master Z597 Diesel Service Manual
DSC-1591
DSC-1592