11. Remove the fuel tank bracket by removing 3
locknuts, springs, and 1 bolt (Fig. 042).
Fig 042
Left Side Fuel Tank Installation
Reverse the order of removal.
Note: When tightening the nuts and bolts, Do Not
over-tighten the nuts. Tighten until there
are 3 threads showing on the threaded stud
(Fig. 043).
A
C
Fig 043
A. Tank Stud
B. Compression Spring
C. Tank mounting Plate
Z Master Z597 Diesel Service Manual
DSC-1576
B
D
E
3 thread above nut
D. Nut
E. 3 Threads
Hood Assembly Removal
1. Unhook the two rubber latches located on the rear of
the hood.
2. Remove the two hairpins, clevis pins, and washers
located in the front left and right side of the hood
(Fig. 044).
Fig 044
3. Lift the hood and remove the stop lanyards located
on each side of the hood. Remove the hood from the
frame of the unit (Fig. 045).
Fig 045
CHASSIS
DSC-1579
DSC-1581
3-11
3