CHASSIS
3. Remove bearing spacers and the front caster
spacer. Remove the seals located on each side of
the wheel and both the tapered bearings (Fig. 024).
A. Bearing Spacer
B. Bearing Seal
C. Taper Bearing
B
A
C
3
D
E
4. Pack both tapered wheel bearings. Reassemble
per Fig. 024. Pump grease into the wheel bearings
through the grease fitting located on the rim (Fig.
025).
3-6
D. Caster Spacer
E. Retaining wheel nut
F. Retaining wheel bolt
B
C
A
F
Fig 024
DSC-1546
Fig 025
DSC-1547
Fuel Tank Removal
Right Side Fuel Tank Removal
1. Disconnect the negative battery cable. Empty the
fuel tank.
2. Remove the fuel hose at the bottom of the fuel tank
(Fig. 026).
Fig 026
3. Remove the fuel return line located on the inside of
the fuel tank (Fig. 027).
Fig 027
Z Master Z597 Diesel Service Manual
DSC-1548
DSC-1549