Engine Installation - Toro Z Master Z597 Service Manual

41. Carefully lift the engine with the hoist. As the engine
is being lifted out, turn it slightly to gain clearance
between the engine drive pulley, pump idler pulley,
and the RH pump pulley. Also, you may have to
turn the engine so the muffler clears the right rear
radiator support bracket (Fig. 257).
Fig 257

Engine Installation

1. Before installing the engine, make sure the large
washer is located on top of the rear engine mount
isolator (Fig. 258).
Fig 258
Z Master Z597 Diesel Service Manual
2. Carefully lower the engine into the frame of the unit.
The engine will have to be turned slightly so the
muffler clears the right rear radiator support bracket
and to clear the engine drive pulley, pump idler
pulley and the RH pump pulley.
3. Install the bolt and nut on the engine rear mount, do
not tighten (Fig. 259).
DSC-2480
DSC-2481
ENGINE
Fig 259 DSC-2482
5
5-11