HYDRAULIC SYSTEM
Wheel Motor Removal
1. Disconnect the battery negative cable.
2. Raise the rear wheels of the machine off the ground
and support frame with jackstands. Remove the rear
wheel (Fig. 142).
4
3. Apply the parking brake and remove the cotter pin
from the wheel motor output shaft (Fig. 143).
4-8
Fig 142
DSC-2102
Fig 143
DSC-2103
4. Loosen and remove nut securing hub to the wheel
motor output shaft (Fig. 144).
Fig 144
5. Remove the 3 bolts securing the brake band to the
actuator (Fig. 145).
Fig 145
Z Master Z597 Diesel Service Manual
DSC-2105
DSC-2106