Toro Z Master Z597 Service Manual page 103

ENGINE
20. Install the following wires to the engine:
• Dark Blue to the oil pressure sending unit (E)
• Dark Green to the fuel solenoid (F)
(Fig. 274).
E
21. Install the following wires:
• Pink/Black to the glow plug strap (A)
• Yellow/Red to the temperature sender (B)
• Black/Green to the temperature switch (C)
5
(Fig. 275).
A
5-16
F
Fig 274 DSC-2446
B
C
Fig 275 DSC-2445
22. Install the throttle cable; follow instructions under
Throttle Control Installation page 3-13.
23. Install the two fuel lines to the injector pump. Make
sure you install the tagged or marked fuel line to the
Out or return connector (Fig. 276).
Fig 276
24. Install the air cleaner assembly (Fig. 277).
Fig 277
Z Master Z597 Diesel Service Manual
DSC-2443
DSC-2442