Replacing The Mower Spindle Belt - Toro Z Master Z597 Service Manual

4. Relieve tension on the idler bracket with the 3/8"
drive ratchet and 12" extension. Install the left side
mower drive belt onto the idler pulley (Fig. 528).
Fig 528
5. Install the rear bumper assembly and tighten the 4
bolts (Fig. 529).
Fig 529
Z Master 597 Diesel Series Service Manual

Replacing the Mower Spindle Belt

Belt squeal/slippage, frayed belt edges, burn marks and
cracks are signs of a worn belt. Replace the mower belt
if any of theses conditions are evident.
1. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the right and left belt covers (Fig. 530).
DSC-2651
DSC-2595
MOWER DECKS
Fig 530 DSC-2626
7
7-39