Toro Z Master Z597 Service Manual page 36

7. Install throttle control knob and position throttle
control lever to the idle position (Fig. 058).
Fig 058
8. Position the throttle cable swivel clamp until 1/4"
(6.35mm) of the throttle cable wire protrudes through
the opposite end of the clamp. Carefully tighten the
swivel clamp screw (Fig. 059).
Fig 059
Z Master Z597 Diesel Service Manual
9. Tighten the cable housing clamp (Fig. 060).
DSC-1608
10. Move the throttle control lever to the Full speed
position. Verify injector pump arm contacts the high
speed stop screw (Fig. 061).
DSC-1614
CHASSIS
Fig 060 DSC-1616
Fig 061 DSC-1617
3
3-15