Toro Z Master Z597 Service Manual page 113

ENGINE
3. Before tightening the bolts and washers, check
to make sure there is clearance between the fan
blades and the engine cooling shroud and then
tighten all 6 bolts.
4. Install the two hydraulic case drain lines to the
T-fitting, located under the front left corner of the
radiator (Fig. 313).
5
5. Install and tighten the tank return hydraulic hose
assembly to the radiator. This is located at the left
rear corner of the radiator (Fig. 314).
5-26
Fig 313 DSC-2656
Fig 314 DSC-2652
6. Install the radiator overflow hose and tie strap the
hose next to the radiator cap (Fig. 315).
Fig 315
7. Install the engine outlet hose, located on the right
side of the fan mounting plate assembly. Through
the access hole tighten the hose clamp (Fig. 316).
Fig 316
Z Master Z597 Diesel Service Manual
DSC-2434
DSC-2428