ENGINE
10. Install both the mower drive belts; refer to Replacing
Mower Drive Belts, page 7-41.
11. Install the bolt, spacer, washers, and nuts holding
the clutch/brake strap to the frame (Fig. 266). Follow
the hardware sequence in the diagram (Fig. 267).
5
D
C
B
A
A. Nut - lock
B. Washer, large
C. Spacer
D. Grommet, brake
5-14
Fig 266
G
E
B
Fig 267
deck belt drive
E. Spacer, large
F. Washer, flat
G. Screw, HH
12. Pull the spring loaded idler down and install the fan
drive belt (Fig. 268).
13. Secure the two ground wires to the bracket located
DSC-2488
below the starter motor on the engine (Fig. 269).
F
Fig 268
Fig 269
Z Master Z597 Diesel Service Manual
DSC-2489
DSC-2451