CHASSIS
6. On the left side, remove the two bolts, spacers, and
nuts holding the flange bearing (Fig. 076).
3
7. Remove the brake shaft from the frame (Fig. 077).
3-20
Fig 076
DSC-1636
Fig 077
DSC-1637
8. Inspect brake shaft and flange bushings for
excessive wear (Fig. 078).
A
B
D
Fig 078
A. RH Mounting Bolts
B. Brake Shaft
C. LH Mounting Bolts
Brake Shaft Installation
1. Install the flange bearing on the right side of the
shaft. From the outside of the frame, align the flange
bearing holes with the frame mounting holes. Install
mounting hardware and tighten (Fig. 079).
Fig 079
Z Master Z597 Diesel Service Manual
C
D
E
DSC-1638
D. Flange Bearing
E. Spacers
DSC-1640