Operator Presence Control Lever Installation - Toro 30284 Service Manual

Operator Presence Control Lever
Installation
1. Install the Operator Presence Control (OPC) rod,
spring tab end fi rst, through the left side of the
control panel and install the right end of the rod into
the opening on the right side handle bar. Sliding the
rod further through the right side handle bar opening,
install the left end of the rod through the left handle
bar opening (Fig. 0432).
Fig 0432
2. Install the PTO switch into the control panel (Fig.
0433).
Fig 0433
Floating Deck Mid-Size Service Manual
3. Plug the wire harness into the PTO switch (Fig.
0434).
4. Install the extension spring onto the OPC rod and
the tab on the underside of the control panel (Fig.
0435).
PICT-0736
PICT-0729a
LINKAGE
Fig 0434 PICT-0728
Fig 0435 PICT-0727
4
4-37