Toro Z Master Z597 Service Manual page 35

CHASSIS
3. Route the throttle cable through the tie strap located
on the engine lifting bracket (Fig. 054).
3
4. The throttle cable is then routed around the fuel
pump injector lines and through the swivel clamp.
Note: The cable wire should be routed through the
swivel clamp, with the swivel clamp washer
located under the cable wire (Fig. 055).
A. Cable wire
3-14
Fig 054
A
B
Fig 055
B. Washer
5. Install the throttle cable on the inside of the casing
clamp, DO NOT tighten (Fig. 056).
DSC-1599
6. Install control panel to the fuel tank mount location
(Fig. 057).
DSC-1600
Fig 056
Fig 057
Z Master Z597 Diesel Service Manual
DSC-1605
DSC-1606