Toro Z Master Z597 Service Manual page 46

10. Remove hex bolt, bushing, and nylock nut
connecting the deck lift arm plates to the mower
deck rear cross-shaft lift assembly (Fig. 092).
Fig 092
11. Remove retainer clip from lift lever (Fig. 093).
Fig 093
Z Master Z597 Diesel Service Manual
12. When removing the lift lever you may experience
interference with the RH floor pan hinge or the front
edge of the RH motion control plate, or both (Fig.
094).
A
DSC-1655
A. RH Floor pan hinge
13. If the lift lever contacts the RH floor pan hinge,
loosen the RH floor pan hinge mounting hardware.
Push the RH hinge upward. Re-tighten the RH floor
pan hinge mounting hardware (Fig. 095).
DSC-1656
A. RH Floor pan hinge
CHASSIS
B
Fig 094 DSC-1657
B. RH Motion control plate
A
Fig 095 DSC-1661
3
3-25