32. Pull the spring loaded idler down and remove the fan
drive belt (Fig. 249).
Fig 249
33. Remove the bolt and nut holding the clutch/brake
strap and rotate the strap up and out of the way
(Fig. 250).
Fig 250
Z Master Z597 Diesel Service Manual
34. Remove both mower drive belts; refer to Replacing
Mower Drive Belts, page 7-41.
35. Located on the left rear side of the engine is a
ball joint assembly, between the frame and the
engine flywheel cover. Remove the nut holding the
assembly to the frame (Fig. 251).
DSC-2453
36. Remove the bolt holding the ball joint link to the
flywheel cover (Fig. 252).
DSC-2455
ENGINE
Fig 251
DSC-2457
Fig 252
DSC-2458
5
5-9