Toro Z Master Z597 Service Manual page 74

4. Apply a thread locking compound to the hex set
screws and tighten both screws (Fig. 190).
Fig 190
5. Install the fan motor mount to the fan mounting plate
(Fig. 191).
Fig 191
Z Master Z597 Diesel Service Manual
HYDRAULIC SYSTEM
6. Install the 4 bolts and nuts that retain the fan motor
mount to the fan mounting plate.
Note: Make sure the mounting tab on the fan motor
mount is facing toward the left rear of the
unit. Before tightening the bolts and nuts,
make sure the fan is centered in the middle
of the fan shroud. Tighten the bolts and nuts
(Fig. 192).
DSC-2396
A. Mounting tab
7. Install the hydraulic lines to the hydraulic fan motor
and tighten (Fig. 193).
DSC-2380
A
Fig 192 DSC-2404
Fig 193 DSC-2378
4
4-21