Toro Z Master Z597 Service Manual page 62

6. Remove the brake band from the hub (Fig. 146).
Fig 146
7. Install a wheel puller on to the hub and remove the
hub from the motor output shaft (Fig. 147).
Fig 147
Note: The Hub Removal Tool (TOR 4097) can also
be used and is available through your Toro
Distributor.
Z Master Z597 Diesel Service Manual
HYDRAULIC SYSTEM
8. Clean any dirt or debris away from the hydraulic line
fittings. Remove the hydraulic lines.
Note: Cap the fittings and hoses to prevent dirt from
entering the hydraulic system (Fig. 148).
DSC-2107
9. Remove the front two wheel motor mounting bolts,
lock washers, and nuts (Fig. 149).
DSC-2108
Fig 148 DSC-2110
Fig 149 DSC-2111
4
4-9