MOWER DECKS
4. Pull the spring loaded idler down and remove the fan
drive belt (Fig. 538).
5. Disconnect the PTO clutch harness from the wiring
harness (Fig. 539).
7
7-42
Fig 538
DSC-2596
Fig 539
DSC-2601
6. Remove the bolt, spacer, washers, and nut retaining
the clutch/brake strap to the frame (Fig. 540).
Fig 540
7. There is a 3/8" square hole in the idler arm on the
LH side of the machine (Fig. 541).
Fig 541
Note: Rear tire removed for clarity.
Z Master 597 Diesel Series Service Manual
DSC-2604
DSC-2650