Toro Z Master Z597 Service Manual page 48

3. Install retainer clip to lift lever shaft (Fig. 100).
Fig 100
4. Install bushing into rear lift arm cross shaft (Fig.
101).
A
Fig 101
A. Bushing
Z Master Z597 Diesel Service Manual
5. Install hex bolt through deck lift plates and rear
lift arm cross shaft bushing. Install nylock nut and
tighten (Fig. 102).
A
A
DSC-1672
A. Rear Lift Arm Plates
6. Rotate deck lift plate (inner) downward until lower
mounting holes line up with hole in carrier frame and
deck lift plate (outer). From the outside of the frame,
install hex bolt, spacer, and flanged lock nut as
shown. Tighten bolt (Fig. 103).
DSC-1674
A. Hex Bolt
B. Spacer
CHASSIS
B
Fig 102
B. Hex Bolt
A B C
Fig 103
C. Flanged Lock Nut
3
DSC-1675
DSC-1677
3-27