Toro Z Master Z597 Service Manual page 97

ENGINE
37. Remove the bolt holding the ball joint link to the left
front engine bracket (Fig. 253).
38. On the left side of the engine, remove the bolt, nut
and washers from the left hand engine mount (Fig.
254).
5
5-10
Fig 253 DSC-2460
Fig 254 DSC-2468
39. Repeat the procedure on the right hand engine
mount.
Note: Before removing the rear engine mount,
install engine hoist to the lifting brackets
located on top of the engine (Fig. 255). Raise
until there is NO slack in the lift chain.
Fig 255
40. Remove the bolt, washer and nut on the engine rear
mount (Fig. 256).
Fig 256
Z Master Z597 Diesel Service Manual
DSC-2469
DSC-2470