Toro Z Master Z597 Service Manual page 75

HYDRAULIC SYSTEM
8. Remove the nylon tie strap to lower the fan mounting
plate and radiator assembly. Reinstall the 4 bolts
and nuts that retain the fan mounting plate to the
right and left upper frame and tighten the bolts,
including the front two nuts and bolts (Fig. 194).
4
9. Install the two hose clamps; the large clamp
retaining the inlet cooling hose and the small clamp
for the overflow hose to the radiator. Secure the
throttle cable to the clamp with a tie strap (Fig. 195).
4-22
Fig 194 DSC-2371
Fig 195 DSC-2405
10. Install clamp, located on the left side of the unit, that
retains the hydraulic return line. Tighten the bolt and
nut (Fig. 196).
Fig 196
11. Install the engine access panel and the engine belt
shield with the two knobs (Fig. 197).
Fig 197
Z Master Z597 Diesel Service Manual
DSC-2372
DSC-2071