Toro Z Master Z597 Service Manual page 180

3. Remove the RH idler pulley (Fig. 504)
Fig 504
4. Loosen the idler stop flange nut (Fig. 505).
Fig 505
Z Master 597 Diesel Series Service Manual
5. Insert the ratchet with a 6" extension into the square-
cut hole in the idler arm. Pull back on the idler arm
to remove tension from the stop spacers and bolt.
Remove the stop spacers and bolt and release the
idler arm (Fig. 506).
DSC-2716
6. Remove the belt tensioner spacer, washer, and bolt
to allow for removal of the extension spring (Fig.
507).
DSC-2719
MOWER DECKS
Fig 506
Fig 507
DSC-2720
7
DSC-2725
7-33