CHAPTER 7
Installing the MX480 Router with a
Mechanical Lift
Tools Required to Install the MX480 Router with a Mechanical Lift
Related
Documentation
Removing Components from the MX480 Router Before Installing It with a Lift
Copyright © 2011, Juniper Networks, Inc.
Tools Required to Install the MX480 Router with a Mechanical Lift on page 61
Removing Components from the MX480 Router Before Installing It with a Lift on page 61
Installing the MX480 Router Using a Mechanical Lift on page 66
Reinstalling Components in the MX480 Router After Installing It with a Lift on page 68
Installing the MX480 Router Cable Management Bracket on page 73
To install the router, you need the following tools:
Mechanical lift
Phillips (+) screwdrivers, numbers 1 and 2
7/16-in. (11 mm) nut driver
ESD grounding wrist strap
Installing the MX480 Router Using a Mechanical Lift on page 66
Removing Components from the MX480 Router Before Installing It with a Lift on
page 61
Installing the MX480 Router Using a Mechanical Lift on page 66
Reinstalling Components in the MX480 Router After Installing It with a Lift on page 68
To make the router light enough to install with a lift, you must first remove most
components from the chassis. The procedures for removing components from the chassis
are for initial installation only, and assume that you have not connected power cables
61