Crankcase/Oil Pan - Suzuki GSX1400 Service Manual

CRANKCASE/OIL PAN

OIL CHECK VALVE
• Install the oil check valve.
Oil check valve: 35 N . m (3.5 kgf . m, 26 lb-ft)
LOWER CRANKCASE
• Inspect the gearshift shaft bearings (1 and 2) and the gear-
shift cam bearing 3 for abnormal noise and smooth rotation
while they are in the crankcase.
• Replace a bearing if there is anything unusual.
Bearing replacement
• Remove the oil seal.
• Remove the gearshift shaft bearing using the special tool.
09921-20210: Bearing remover
09930-30102: Sliding shaft
• Install the bearings using the special tool.
09913-70210: Bearing installer set (20mm)
www.GSX1400FE.com
ENGINE 3-53