Clutch Release Cylinder And Master Cylinder; Construction - Suzuki GSX1400 Service Manual

6-64 CHASSIS

CLUTCH RELEASE CYLINDER AND MASTER CYLINDER

CONSTRUCTION

N . m kgf . m
ITEM
A
10 1.0
B
23 2.3
C
8 0.8
* This clutch system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use or mix
different types of fluid such as silicone-based or petroleum-based.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake fluid
left over from the last servicing or stored for long periods.
* When storing the brake fluid, seal the container completely and keep away from children.
* When replenishing brake fluid, take care not to get dust into fluid.
* When washing brake components, use fresh brake fluid. Never use cleaning solvent.
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials etc. and
will damage them sererly.
www.GSX1400FE.com
lb-ft
7.3
16.5
5.7
1
Diaphragm
2
Push rod
3
Dust boot
4
Piston/cup set
5
Clutch hose
6
Clutch push rod
7
Piston
8
Piston cup
9
Spring
A
Clutch master cylinder mounting bolt
B
Clutch hose union bolt
C
Air bleeder valve