Suzuki GSX1400 Service Manual page 57

• Remove the wave washer 1, the back torque limiter 2 and
the clutch sleeve hub.
• Remove the washer 3 and the primary driven gear assembly.
• Remove the spacer, the bearing and the washer.
OIL PUMP DRIVEN GEAR
• Remove the circlip 1 and the washer 2.
• Remove the oil pump driven gear.
NOTE:
Do not drop the circlip, the pin and the washer into the crank-
case.
• Remove the pin 3 and the washer 4.
GEARSHIFT SHAFT
• With the circlip removed, remove the gearshift shaft assembly.
• Remove the gearshift cam plate 1 and the gearshift cam stop-
per 2.
www.GSX1400FE.com
ENGINE 3-17