Suzuki GSX1400 Service Manual page 49

• Apply a small quantity of THREAD LOCK to the drive shaft
thread portion and tighten the engine sprocket nut 1 to the
specified torque.
99000-32050: THREAD LOCK "1342"
Engine sprocket nut: 115 N . m (11.5 kgf . m, 83.2 lb-ft)
• Tighten the speed sensor rotor bolt 2 to the specified torque.
Speed sensor rotor bolt: 20 N . m (2.0 kgf . m, 14.8 lb-ft)
• Apply grease to the clutch push rod and clutch release piston,
and install it.
99000-25010: SUZUKI SUPER GREASE "A"
CLUCH RELEASE CYLINDER
• Install the clutch release cylinder housing.
Clutch release cylinder housing bolt:
GEARSHIFT LEVER
• Install the engine sprocket cover and the gearshift lever.
Gearshift lever hight: 40 – 50 mm (1.6 – 2.0 in)
www.GSX1400FE.com
10 N . m (1.0 kgf . m, 7.4 lb-ft)
ENGINE 3-9