Suzuki GSX1400 Service Manual page 112

3-72 ENGINE
CYLINDER
• Install the dowel pins and gasket.
• Apply engine oil to the sliding surface of the pistons and cylin-
der walls.
• Set the special tools to the No.2 and No.3 pistons, and insert
them into the cylinder block.
! 09916-74521: Holder body
09916-54550: Band
NOTE:
Do not over tighten the special tool bands or the pistons entry
into the cylinders will be difficult.
• After inserting the No.2 and No.3 pistons in place, insert the
No.1 and No.4 pistons.
• Tighten cylinder nut A temporarily.
CYLINDER HEAD
• Apply grease to the O-rings and insert the oil return pipes to
the crankcase.
" 99000-25010: SUZUKI SUPER GREASE "A"
• Fit the dowel pins and the new cylinder head gasket to the
cylinder.
www.GSX1400FE.com